Home » Home Energy Tips

Brick Stone House Energy Efficient Secrets

6 February 2010 78 views One Comment
Tags: ,

By: The Handyman Guy

How Can Brick Stone Make Your Home Energy Efficient

A home that’s energy-efficient is in fact healthier & cost effective. Energy efficiency adjustments in your house can eliminate or at least lessen the poor quality of air that’s brought in by various weather conditions.

One way to create your home energy efficient is to be cautious to the building materials and to the home design.

In Australia, bricks have long been recognized as commonly chosen building materials. Truthfully, closely 90% of the built homes in the said place are constructed using bricks.

Due to the fact that of the campaign to decline energy consumption in its entire forms, there are building regulations these days that require the newly built homes to be more energy efficient.

Well there are a few things you have to know in order that come up with an informed choice.

Think about the amount of energy that’s in most cases consumed in your house. Perhaps, you’ll be startled to find out that a large part of the home energy is used up in cooling and heating.

Cooking and lighting, also when put as a group, comprise just a few percent. Hence, anything which can assistance lessen the cooling and heating bills of your home will be a good investment, right? But what we must ask ourselves is, do you think it’s realistic to cut down cooling & heating energy consumption while keeping up a practical thermic comfort into your house? It’s in this situation that passive remodel comes inside play.

Passive design handles the energy coming from the sun to improve the house’s cooling and heating in a natural way. There are as a matter of fact 4 major principles in passive remodel. These are orientation, insulation and thermal mass.

· Orientation. The huge cup portion in the north part allows the low winter sun in. & to block the high summer sun, simple shading like eaves is applied.

· Ventilation. When the crest of summer time has already passed, air is permitted to obtain in & go out of the home so that make it cool in a natural manner. To optimize cross ventilation, the either side of the building or the home have generous openings with closely negligible interior obstructions.

· Insulation. The insulation in the wall and ceiling was used as the obstacle to heat transportation. Insulation efficiency may be calculated by means of its R-value but it does not present the whole issue. Various walls may have the same R-value but mayn’t work the same.

· Thermal Mass. Wall materials that are dense and heavy, like bricks, suck up heat and hamper its conveyance through the walls. Through these, temperature changes shift to moderate and the heat sucking up throughout summer is meaningfully hampered. Equated with brick walls, the lightweight materials have extremely low thermal mass. And because of this thermic mass, brick walls become more capable of moderating house temperature even though they have similar R-values.

Now come to consider thermal mass & consider brick stone. The first 2 techniques in the passive design, which are orientation and ventilation, need to be set up into the home. And your home material preference has a major effect on the quantity of thermic mass in a home or a building.

One of the simplest and most economical ways to put up thermic mass is through bricks. Those bricks that are extracted from clay contain very high thermic mass. They are available to make your house well ventilated, comfortable and more energy efficient.

There’s a research proving the idea that Brick stone homes are energy efficient. The said research has revealed that a large part of the heat is bounced back to the outside surroundings via the brick’s exterior panel.

Another conclusion that came out is that in summer season, the temperature into a home that is constructed from bricks remained favorable and comfortable despite the changing temperature outside.

The US Department of Energy stated that thermal mass stores up heat by means of converting its temperature.

It can be achieved by storing heat coming from a warm room or by means or transforming direct solar radiation into heat & since brick stone has more thermal mass than other building lightweight materials, it’s a very useful element that may be used up in forming your house more energy efficient.

To sum up, brick is a very simple and inexpensive technique in putting up thermal mass in your next home.

Therefore a brick stone home is more energy efficient than those that are produced from other materials.

About the Author

Need more information? Visit www.The-Handyman-Guy.com/HomeEnergy/ and grab a copy of my eBook titled “How To make Your Home Energy And Cost Efficient”.

In www.The-Handyman-Guy.com/HomeEnergy/ , You may registered for my brand new eCourse, completely FREE!

(ArticlesBase SC #224271)

Article Source: http://www.articlesbase.com/Brick Stone House Energy Efficient Secrets

You Might Also Enjoy...

1 Star2 Stars3 Stars4 Stars5 Stars (No Ratings Yet)
Loading ... Loading ...

One Comment »

  • dextercath96 said:

    I wonder how Brick Stone House Energy becomes efficient? I know solar power generator is more effecient than that. Read http://www.sunpowerport.com . Can I know your opinion about this?

Leave your response!

Add your comment below, or trackback from your own site. You can also subscribe to these comments via RSS.

Be nice. Keep it clean. Stay on topic. No spam.

You can use these tags:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>

This is a Gravatar-enabled weblog. To get your own globally-recognized-avatar, please register at Gravatar.

the truth green coffee beans